Skip to content
How To Use Transfer Paper Cricut. To use transfer paper, print your design onto the coated side of the paper and then use your cricut to cut out the plan. Once your design is cut out, peel away the excess paper and apply the transfer to your desired surface.
Place the easypress on top of the design and press down. To use transfer paper, print your design onto the coated side of the paper and then use your cricut to cut out the plan. Be sure to test the dial settings before cutting large quantities.
Furthermore, Can You Use Wax Paper Instead Of Transfer Paper?
Set your base material to light card stock to ensure a clean cut through the paper. Once your design is cut out, peel away the excess paper and apply the transfer to your desired surface. Peel vinyl liner away from transfer tape and design.
Use A Scraper Tool To Smooth The Transfer Tape Onto The Vinyl.
Rub it from one side to the other. To be honest, cricut transfer tape is all i have been using the past few years. Position your heat transfer vinyl design on your shirt.
Load The Mat Into Your Cricut.
Place the easypress on top of the design and press down. Align the paper with the dark side down on the receiving surface. Vinyl transfer paper aka vinyl transfer tape is great for crafters!
For Best Results, Use A Piece Of Scrap Paper To Test Your.
Put the wax paper in the printer and make sure it's under. Cut using sharp scissors or a precision knife to ensure that the edges of the paper do not rip or snag. Make sure project surface is clean and dry.
With Your Project In Front Of You, Put Your Transfer Tape Over The Top Of It.
Once your weeding is done, it’s time to grab your transfer tape. Place infusible ink transfer sheet onto standardgrip mat, liner side down. Cut a piece of transfer tape a little larger than your design.