Skip to content
How To Take Apart A Lazyboy Recliner. The first step to disassemble your recliner is to locate the release levers on the back of your chair. Rolling the chair onto its back.
You should be able to find these by putting your fingers into the gap between the recliner back and base. Take the screw out of the pin, then pull the pin out (towards the middle of the chair, in the. Rolling the chair onto its back.
So That The Back Faces Straight Up Into The Air, Lift The Sofa Up.
Tilt the sofa forward and extend the strip of side upholstery. Look in the crack between the arms and the. Locate locking brackets on the back.
Move The Tip Of The Screwdriver Under One Segment Of The Tab To Lift It Up And Pop It Open.
How to take apart a lazyboy recliner? Then grasp the back cushion and pull it. How to care for lazyboy recliner.
If You Are Going To Clean Your Chair, Use A Dry Brush Or Rag And Wipe Away Any Dust That Has Accumulated On The Surfaces.
Behind your recliner, identify the locking lever on both sides. Rolling the chair onto its back. Remove the back of the recliner (see figure 1) push the recliner forward so the recliner arms are touching the floor.
The Company Manufactures Numerous Couch Models, But All Are Made Differently.
This will free that flat arm. You’ll need to locate the locking brackets,. Place your recliner in a position that it’s resting on the arms while lying on the ground.
Place Your Recliner In A Position That It’s Resting On The Arms While Lying On The Ground.
Use a flat head screwdriver or, in a pinch, your fingertips to loosen and raise each lever and release the seat backs. Slide a screwdriver between the upholstery and the back of the chair. Click on picture to enlarge.