Skip to content
How To Remove Shower Drain Cover. Wait for one or two minutes. Pour the entire bottle of soda into the drain, and allow it to sit for at least an hour.
Leave it for about 2. The adhesive will slowly loosen. Insert the screwdriver from the rim of the cover.
Use Your Flathead Screwdriver To Unscrew The Base Of The Drain Cover.
The first step is to remove the drain cover to access the rubber gasket. Press the drain, so it’s in the open position. The best option is to use a drain clog remover tool, baking soda and vinegar, or a plunger, to relieve the issue.
So You Have To Lift It Keeping It Level.
How to fix a leaking shower drain 1. Send a handful of baking soda and hot water down the drain. The job takes about 30 minutes and doesn’t require any special plumbing tools.
After That Screw, It Tight Using A Screwdriver.
Send a handful of baking soda and hot water down the drain. How to remove a shower drain cover: Take a clean washcloth or a paper towel to wipe down the drain cover.
Use A Phillips Screwdriver To Remove Each Screw Around The Grate.
As a first step, you need to remove the drain cover. Sometimes you may not even need to remove the drain cover. Apply a generous amount of lubricant on and around the drain.
Take Off The Shower Cover.
Now lift the drain cover off completely. Once most of the hair is out pour about half a. Place the screws in a resealable bag or tray so they don’t get lost or fall down the open drain.