Skip to content
How To Relight A Pilot Light On A Furnace. It has the settings on, off, and pilot. Hold the lit match to the pilot.
This will stop the flow of gas into the room. Then, hold down the “reset” button, bringing the flame of a long lighter close to the pilot light opening. Find the pilot light assembly.
Turning The Control Knob To “Pilot” Does Just.
Hold the lit match to the pilot. If your furnace pilot light goes out, it doesn't always mean a costly repair. How to light a furnace pilot light.
Open The Gas Valve On The Supply Line And Turn The Gas Control Knob To Pilot.
Turn the gas valve to the “off” setting. Turn the valve to the pilot setting and hold it to resume the gas flow. After waiting five or 10.
Amana 90 Air Command Furnace Therescipes.info From Www.therecipes.info.
If it’s on, you should be able to see a small flame. The pilot light should light, but keep holding the small button down for about a minute. The pilot light in a gas furnace is a continuously burning flame that ignites the burners.
This Will Stop The Flow Of Gas Into The Room.
Then, hold down the “reset” button, bringing the flame of a long lighter close to the pilot light opening. Also, how do you relight a pilot light? Wait for 10 minutes for the furnace to fully shout down.
Light A Lighter Or Match, Then Push In The Reset Button.
It has the settings on, off, and pilot. Steps for relighting the furnace pilot light. Find the pilot light assembly.