Skip to content
How To Clean Whirlpool Washer Drain. This article walks through the appropriate steps to properly clean your drain hose and elbow. You will then unscrew three.
The clean washer cycle operation is described below. Push your washer away from the wall to gain access to both the inlet and outlet hoses. Detach the drain hose from the machine.
Ensure That You Connect The Hose Coming From The Tub To The Inlet On The Pump And The Drain Hose To The Outlet.
Clean washer with affresh ® tablets. All signs pointed to a faulty lid switch. The clean washer cycle operation is described below.
Plug Your Washing Machine Into The Outlet And Turn The Water Faucets Back On.
The small holes in the spray arm get stuck with the food particles and dirt which needs to be unclogged. How do you fix a slow draining washing machine? [3] if the clog you are trying to dislodge is not disrupted by chemicals, then you will need to use a snake to.
Drain The Washing Machine Of Water.
This will make the drain accessible when troubleshooting. You will then unscrew three. Make sure the whirlpool washer’s drain hose isn’t clogged or kinked.
Select The Clean Washer Cycle.
Remove the drawer by releasing the tab on each side. To clean the outside of the washer, wipe down the body with a washing machine cleaning wipes or a soapy, wet cloth. If that doesn’t solve the issue, unclog your drain pipe by pouring hot water down the drain, followed straight after by.
Touch And Hold The Start/Pause Button For 3 Seconds To Begin The Cycle.
If the washing machine tries to repeat the cycle again, then chances are. One way to test if this is the issue is to unplug the washer for ten seconds, then plug it back in and run the cleaning cycle. Transfer standing water from the dishwasher.