Skip to content
How To Change Battery In Honda Key Fob 2019. Use the key or a small flathead screwdriver. Make sure to replace the battery with the correct polarity *note.
Insert the battery back into the motherboard with the positive sign. Wait for the doors to lock and unlock automatically. Now that the key fob is open, make sure that you press down the contents of the key fob to prevent them from falling apart by keeping your thumb on.
Insert The Battery Back Into The Motherboard With The Positive Sign.
Turn the key to the “on” position and hold the “lock”. When you turn the key fob, you will see a small latch at the back. Follow these steps to change the battery in a honda key fob:
Make Sure To Replace The Battery With The Correct Polarity *Note.
Afterward, place the edge of the key into the slot at the top of the key fob. The fob fob consumes battery when transmitting radio waves to communicate. Replace the metal key and again this will click into place.
Release The Button And Turn The Key To The “Off” Position.
Older models may have a screw if it is attached to the back of a key. Then, slide the button open and pull the key out. First, find the button that releases the metal key inside the fob.
Insert The Crossbar Between The Empty Spaces Of The Top Two Buttons, With The Crossbar’s Curvature Facing Outwards.
Insert the battery back into the motherboard with the positive sign facing out. A honda key fob battery can be purchased almost anywhere, although it is recommended to purchase a genuine honda part. If stored near electronic devices such as computers or televisions it has the potential to transmit.
Once The Locks Have Cycled, Your Vehicle Is In.
Using your other hand, carefully pry the dead battery out and replace it with the new one. Use the key or a small flathead screwdriver. Use a small flathead screwdriver to pry off the old battery from the side.