How To Sew A Pillowcase With Flap

How To Sew A Pillowcase With Flap. Insert the pillow into the cover. How to sew a pillowcase.

How to Make an Envalope Style Pillowcase (Flap Keeps Pillows Secure) from www.makeit-loveit.com

This end will be referred to. Turn the fabric inside out, with the printed side facing out. Align the seam and press again.

Use A 3/8″ Seam Allowance.

Quick and easy pillow case with an additional flap that covers the pillow completely. (1) rectangle, 20″ x 17″. Match up the front so both good sides are facing together.

One Of The Short Edges Will Already Be Hemmed And The Other Has A Large Pocket To Slip Your Pillowcase In.

Pin in place and then. Step 3—sew the 2 pieces of fabric together at the shorter edge[1965901]after you have cut the fabric, you will need to sew the front and back of your fabric together on one of the. Stitch the sides with a zigzag stitch.

Now Take The Back Piece Of Fabric And Insert It Into The Pillowcase So That The Right Sides Are Together.

Then grasp each side of the cut. How to sew a pillowcase. Fold the raw edges of the envelope flap along (1/4) and press well.

Use A Chopstick Or Pencil To Gently Push Out The Corner That You Clipped.

Sew right along the lower folded edge and iron flat. Turn your pillowcase inside out and undo the side seams. Try this one to make.

Don’t Stitch The Top Part.

20 6/8″ x 31″ or 52.8cm x 79cm (height x width). This easy enclosed pillowcase tutorial will walk you through the quick, simple steps to make some diy pillow. Use the folded line to be the guide for your fold.

Leave a Reply