How To Reset Blink Camera Wifi. In blink mini, the reset button is at the bottom side, whereas the xt, xt2, outdoor, and indoor camera series have it at the back. Turn the sync module on its side so that the reset button is face up.
The signal should at least be 3 bars. Follow the below steps to reset your blink sync module successfully: Unplug the usb power cord from the blink sync module.
Firstly, You Must Physically Locate The Blink Sync.
1) open the blink app on your smartphone. You can also try to reboot the router. The resetting process starts and when it is done, you will see the solid green and blue light.
Move Your Blink Camera Closer To The Sync Module.
Use a thin object, such as a paper clip or toothpick to press down. Now use a thin object such as a paper clip, safety pin, sim ejector tool, or toothpick to press and hold the reset button. For the blink mini camera, the process is as follows:
Power Cycle Your Modem And Router.
So, if your blink camera refuses to connect to your. Go back to the home screen and click on the + sign (to add the system_. Unplug the usb power cord from the blink sync module.
Select “Delete Sync Module.” Scan Or Enter The Module’s Serial Number Then Tap “Delete”.
Reset the modem and the router. Use your camera to scan the qr code, or enter the serial number manually. The signal should at least be 3 bars.
Follow These Steps To Delete And Reinstall Your Sync Module:
The sync module serial number is on the back, and begins s/n 2 followed by. Tap blink wireless camera system. Follow the below steps to reset your blink sync module successfully: